• Advertisement

bosch ve pumps

Getting the best performance from your Isuzu, the in's and out's

bosch ve pumps

Postby rustyvr4 » Sun Mar 17, 2019 4:27 pm

just in case anyone can use this info. i,ve now worked out that my pump has got a 11mm plunger in it. since all i can find on upgrades for these,s pumps are 12mm. think mine will hold up to the job.
You do not have the required permissions to view the files attached to this post.
No officer i wasn,t slideways i think you was seeing things sir
rustyvr4
Isuzu Baby
 
Posts: 30
Joined: Sun Apr 24, 2011 9:41 am
Age: 33
Country: new zealand
City: tauranga
Vehicle: 1996 mu 3.1 turbo MANUAL, running 20psi. fuel maxed out. air adjustable shocks in rear. gas struts on bonnet

Re: bosch ve pumps

Postby tonkamu » Mon Mar 18, 2019 11:01 am

is the serial number easy to see with the pump attached to engine?
tonkamu
Isuzu Senior
 
Posts: 156
Joined: Sun Jan 01, 2017 7:23 am
Age: 36
Country: NZ
City: Auckland
Vehicle: 2.8 Mu 1991 All Black. MODS - Rear Lifted 2.5" Lovells Leafs / Rear Auto Locker / LSD in front / 33x12.5x15 MT Achilles / 9500 RUNVA w plug n kills switch inside cab / EGT, Voltage, Turbo timer, Boost gauge / 20 PSI VF10 Turbo with VF10 exhaust housing 2.5" downpipe with merged 2" wastegate pipe to full 2.5" straight pipe / GFB Boost Tap / Maxed fuel with grinded down cable stop / Adjusted Boost Compensator / 3.1 Oil Cooler / Intercooled / 3" Custom intake to sealed K&N airbox & filter to Snorkel / Catch Can / Xtreme Outback HD clutch / 80 amp alt / RockfordFosgate 300rms AMP w 2X Rockford Power 6x9's BT HDeck / all EGR, QWS, AC pump deleted.

Re: bosch ve pumps

Postby rustyvr4 » Mon Mar 18, 2019 4:47 pm

kind off had to use camera on phone an take lots of pics till i got one readable. location of id plate is side of pump towards the back. this pic reference to location
You do not have the required permissions to view the files attached to this post.
No officer i wasn,t slideways i think you was seeing things sir
rustyvr4
Isuzu Baby
 
Posts: 30
Joined: Sun Apr 24, 2011 9:41 am
Age: 33
Country: new zealand
City: tauranga
Vehicle: 1996 mu 3.1 turbo MANUAL, running 20psi. fuel maxed out. air adjustable shocks in rear. gas struts on bonnet

Re: bosch ve pumps

Postby paulthepilot5 » Wed Mar 20, 2019 8:09 pm

11mm is the stock size on the 4JB1T, 12mm will still be an upgrade
paulthepilot5
Isuzu Junior
 
Posts: 129
Joined: Thu Apr 05, 2018 8:56 pm
Age: 38
Country: Australia
City: Brisbane
Vehicle: 1995 Isuzu Rodeo 2.8d
Compound twin Turbo
12mm fuel Pump
+50 injectors
Water/meth injection

TF Rodeo ute 2WD short wheelbase
2.8 4JB1T
Inline injection pump conversion
+50 injectors
Borg Warner s200 turbo
300hp, 650nm


Return to Engines and Exhaust

Who is online

Users browsing this forum: No registered users and 12 guests