by geeves » Fri Aug 17, 2012 3:59 pm
snorkleinside.jpg
This is using a disco snorkel. The power steer resiviour and fuse box were both moved but not so far that alterations to wires or pipes needed. The original inlet was welded shut as was the drain in the bottom of the airbox and a new inlet fabricated and attached. It might be possible to use a Mu airbox. Only other thing is that the original inlet had a diffuser plate which the new inlet lacks. The result of this is that any moisture entering via the snorkel causes a paper filter to matt reducing its life significantly. I have a foam filter inside the airbox
You do not have the required permissions to view the files attached to this post.
Sanding your knuckles before starting work can help. That way you cant skin them