by wbski007 » Tue Oct 06, 2009 10:59 pm
I took some photos from the inside looking out as you can see the visor does not block your vison at all,It came off a 1992 S10 Blazer,S10 P/U's would be the same,I imagine you have Chevy S10's over there,I picked up my visor from a U-pull it yard for $20.00,I was lucky I got one with lights,as far as I know they didn't make them for Isuzu's,at least thats what I was told,so I did my own, It fits further down on the windshield then it did on the S10 so I had to make A small bracket to reach over to the windshield piller to fasten the front to, but other than that the back part screwed to the roof as it did on the S10. (see photos) I used 1" self tapping screws to hold the visor to the roof and front pillers, I ran the self tapper in and then out again,added some silicone to the end than ran it back in again. I used # 8 1/2" screw and nut to hold extension tab to front visor hole,as for the tab it self I used a small stainless steal one that held a wind deflector on the front of the sun roof of an old Mercedes I used to have,just had to bend it in an S shape to make it work. If you happen to get a visor with lights like I did I'll leave the wireing to you,HAHA.
Good luck and cheers,Wayne
You do not have the required permissions to view the files attached to this post.
I live in my own little world, but its OK they know me here.
Happy Trails, Wayne