Hi guys
I have just put a 4jg2 with manual fuel pump back into my mu and having some fuel issues.
After bleeding the system I can get the engine to start up and run mint. Until I turn it off. Once turning it off I can start the engine again to have a few misses for a few seconds.
But if I leave it overnight the system needs to be rebled for it to run again.
Things I have done
Replaced fuel filter
Replaced injector heat shields
Put a clear hose from the primer pump outlet to the fuel pump to see if any air bubbles... no air bubbles.
Put a clear hose between the primer pump inlet and chassis rail hard fuel line. no bubbles
Put a clear hose between fuel return rail and injector pump and no fuel at all, is this normal?
before putting the engine back in i didn't have these issues.
Anyone had any issues similar to this, or is there anywhere I can start looking to resolve this?