-
- Advertisement
inlet manifold gasket
5 posts
• Page 1 of 1
inlet manifold gasket
by stardog » Thu Feb 25, 2010 7:53 am
Is the inlet manifold gasket on the 2.8 and the 3.1 motors the same i have rang around diffrent places and they cant find a gasket for the 4jg2-t motor so wondering if the 2.8 gasket will fit.
- stardog
- Isuzu Deity
- Posts: 953
- Joined: Tue Nov 10, 2009 6:14 pm
- Location: sydney nsw australia
- Age: 60
- Country: australia
- City: sydney
- Vehicle: 96 wizard 3.1 top mount intercooler bulbar winch snorkel 2" lift front diff lock aftermarket transmission cooler.
Re: inlet manifold gasket
by geeves » Thu Feb 25, 2010 8:28 am
Good question. Looking at the manuals the 4jb1 shows a gasket but the 4jg2 does not. Maybe its sealant but this would be unusual
Sanding your knuckles before starting work can help. That way you cant skin them
-
geeves - Site Admin
- Posts: 8964
- Joined: Sun May 10, 2009 1:36 pm
- Location: Rangiora
- Age: 63
- Country: NZ
- City: Rangiora
- Vehicle: 94 bighorn 4jg2
2013 Subaru XV
Re: inlet manifold gasket
by turnturn » Thu Feb 25, 2010 10:13 am
I have recently had the intake off my 4JG2-T. It has a gasket that is readily available in New Zealand.
I got mine through BNT. Not sure if this company is in Australia though.
From memory the gasket was actually made by a New Zealand company. I'll have a bit of a scratch around at home later and see if I can find any more info on it.
I got mine through BNT. Not sure if this company is in Australia though.
From memory the gasket was actually made by a New Zealand company. I'll have a bit of a scratch around at home later and see if I can find any more info on it.
-
turnturn - Global Moderator
- Posts: 950
- Joined: Wed May 13, 2009 4:26 pm
- Age: 57
- Country: New Zealand
- City: Dunedin
- Vehicle: 1992 Isuzu Mu 2.8 Manual (UCS55)
Snorkle, Intercooled
1993 Isuzu Mu 2.8 Manual (UCS55)
Spare Parts/Donor
1994 Isuzu Mu 3.1 Manual (UCS69)
Snorkle, Intercooled
1996 Isuzu Mu 3.1 Manual (UCS69)
Completely Standard
Re: inlet manifold gasket
by holden » Thu Feb 25, 2010 12:23 pm
when I done the head on the my 4jb1-t the gasket kit i got was for a 4JG2-T and so all the gaskets i have fitted are right including inlet manifold gasket.
kane
kane
-
holden - Isuzu Junior
- Posts: 67
- Joined: Sat May 09, 2009 6:43 am
- Age: 16
- Country: New Zealand
- City: Whangarei
- Vehicle: 91 Isuzu MU 2.8T D (4JB1T)
Re: inlet manifold gasket
by stardog » Thu Feb 25, 2010 12:57 pm
The both motors look the same except for the turbos and 3.1 has the hose from the rocker cover to the dip stick i will order a 2.8 gasket then thanks for the help guys cheers stardog
- stardog
- Isuzu Deity
- Posts: 953
- Joined: Tue Nov 10, 2009 6:14 pm
- Location: sydney nsw australia
- Age: 60
- Country: australia
- City: sydney
- Vehicle: 96 wizard 3.1 top mount intercooler bulbar winch snorkel 2" lift front diff lock aftermarket transmission cooler.
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 38 guests