Can one of you fine gentelman or ladies please tell me what the electracal doo dad on the top of my injection pump does and also where is the shut off solenoid, is that it rite under the more fuel, go faster screw??
Wayne
-
- Advertisement
wires on injection pump
7 posts
• Page 1 of 1
wires on injection pump
by wbski007 » Wed Nov 18, 2009 5:39 am
You do not have the required permissions to view the files attached to this post.
I live in my own little world, but its OK they know me here.
Happy Trails, Wayne
Happy Trails, Wayne
-
wbski007 - Isuzu Guru
- Posts: 649
- Joined: Sun Sep 27, 2009 7:04 am
- Location: Mary Esther,Florida
- Age: 67
- Country: USA
- City: Mary Esther
- Vehicle: 1998 Isuzu Rodeo,with a 2001,2.5 turbo diesel motor,5 speed,inter-cooler,turned up fuel,adjusted waste gate for 14 psi of boost,air bags under front end with torsion bars ,2.5 exhaust straight thru sidepipe no muffler.
1949 Dodge 2 1/2 ton pumper fire truck, 15,000 original miles, with a 1991 Cummins 5.9 diesel, turned up fuel, 5 speed trans, two speed rear, also added P/S, P/B.
Re: wires on injection pump
by username » Wed Nov 18, 2009 10:18 am
which one do you want to know what does what etc?
top one is throttle position sensor 3 wire plug blue/red blu black
one with one wire is for spill valve - on off - all you need to get it to run cant see colour to well
the other two wire one is pick up for tacho, dont know what colours as cant really see
top one is throttle position sensor 3 wire plug blue/red blu black
one with one wire is for spill valve - on off - all you need to get it to run cant see colour to well
the other two wire one is pick up for tacho, dont know what colours as cant really see
- username
- Isuzu Baby
- Posts: 17
- Joined: Wed Sep 23, 2009 7:59 pm
- Age: 23
- Country: nz
- City: wellington
- Vehicle: few isuzus and toyotas
Re: wires on injection pump
by TrooperNut » Tue Feb 02, 2010 6:15 am
I have a 95 Isuzu Trooper "S", I have a UK Isuzu 4JGT Turbo Diesel installed. The Injection Pump had three wires, two were anti-theft after removing the cover off the Pump, I located the wire that allowed fuel to the engine, worked fine after that. Don't know if this helps but I'm in the States (Flagler Beach Florida)
- TrooperNut
- Isuzu Baby
- Posts: 4
- Joined: Thu Aug 20, 2009 11:22 pm
- Age: 67
- Country: USA
- City: Flagler Beach Florida
- Vehicle: 1995 Isuzu Trooper "S" with a 4JG2 TC Diesel Engine
Re: wires on injection pump
by wbski007 » Tue Feb 02, 2010 11:57 pm
thanks for the info fellas, i was just courious
I live in my own little world, but its OK they know me here.
Happy Trails, Wayne
Happy Trails, Wayne
-
wbski007 - Isuzu Guru
- Posts: 649
- Joined: Sun Sep 27, 2009 7:04 am
- Location: Mary Esther,Florida
- Age: 67
- Country: USA
- City: Mary Esther
- Vehicle: 1998 Isuzu Rodeo,with a 2001,2.5 turbo diesel motor,5 speed,inter-cooler,turned up fuel,adjusted waste gate for 14 psi of boost,air bags under front end with torsion bars ,2.5 exhaust straight thru sidepipe no muffler.
1949 Dodge 2 1/2 ton pumper fire truck, 15,000 original miles, with a 1991 Cummins 5.9 diesel, turned up fuel, 5 speed trans, two speed rear, also added P/S, P/B.
Re: wires on injection pump
by wbski007 » Wed Feb 03, 2010 12:03 am
You say that the 2 wires coming off the back of the pump are for the tach, does anyone know if they will make the gas motor tach in my dash work if hooked up??
I live in my own little world, but its OK they know me here.
Happy Trails, Wayne
Happy Trails, Wayne
-
wbski007 - Isuzu Guru
- Posts: 649
- Joined: Sun Sep 27, 2009 7:04 am
- Location: Mary Esther,Florida
- Age: 67
- Country: USA
- City: Mary Esther
- Vehicle: 1998 Isuzu Rodeo,with a 2001,2.5 turbo diesel motor,5 speed,inter-cooler,turned up fuel,adjusted waste gate for 14 psi of boost,air bags under front end with torsion bars ,2.5 exhaust straight thru sidepipe no muffler.
1949 Dodge 2 1/2 ton pumper fire truck, 15,000 original miles, with a 1991 Cummins 5.9 diesel, turned up fuel, 5 speed trans, two speed rear, also added P/S, P/B.
Re: wires on injection pump
by cidadaesal » Wed Mar 10, 2010 8:40 am
hi,
is the spill valve what we might call the fuel shut off in ireland? really hope so as i'm trying to locate it. is it the singal wire that comes out behind the injector pump?
is the spill valve what we might call the fuel shut off in ireland? really hope so as i'm trying to locate it. is it the singal wire that comes out behind the injector pump?
- cidadaesal
- I'm only here for the information
- Posts: 2
- Joined: Mon Mar 01, 2010 10:26 pm
- Age: 32
- Country: ireland
- City: cork
- Vehicle: ls pick up 3.1d
3.1 trooper
Re: wires on injection pump
by wbski007 » Sat Mar 13, 2010 2:45 am
wish I could help you my friend but wiring is not my thing, sounds like the shut off is the only single wire tho.
I live in my own little world, but its OK they know me here.
Happy Trails, Wayne
Happy Trails, Wayne
-
wbski007 - Isuzu Guru
- Posts: 649
- Joined: Sun Sep 27, 2009 7:04 am
- Location: Mary Esther,Florida
- Age: 67
- Country: USA
- City: Mary Esther
- Vehicle: 1998 Isuzu Rodeo,with a 2001,2.5 turbo diesel motor,5 speed,inter-cooler,turned up fuel,adjusted waste gate for 14 psi of boost,air bags under front end with torsion bars ,2.5 exhaust straight thru sidepipe no muffler.
1949 Dodge 2 1/2 ton pumper fire truck, 15,000 original miles, with a 1991 Cummins 5.9 diesel, turned up fuel, 5 speed trans, two speed rear, also added P/S, P/B.
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 6 guests