Hey guys, been piecing this project together over the last couple years and have finally found some time to put it all together. It was previously converted with another diesel motor that I have long since removed,
Im now upto the wiring stage, I have fuel pump, starter and most temp/pressure switches figured out, but the alternator has me stumped.
It appears to retain the complete 4ze1 loom, with plugs where they had changed wiring to suit the old motor, all I need it to know which wire I need to match to where from the 4jb1t alternator to the 4ze1 loom, tia
4jb1 3 pin plug has as follows
Thick white/black stripe
White with green stripe
Black with yellow stripe
4ze1 loom has as follows
White with blue stripe
White with yellow stripe
Again thanks in advance for any help