Can you tell me what size socket I need to remove the pinion nut on my diff please?
Thanks
-
- Advertisement
99 Jackaroo petrol pinion nut
2 posts
• Page 1 of 1
99 Jackaroo petrol pinion nut
by jeffwithjack » Sun Nov 23, 2014 5:40 pm
- jeffwithjack
- Isuzu Baby
- Posts: 21
- Joined: Thu Dec 12, 2013 6:13 pm
- Age: 65
- Country: australia
- City: Carlton Beach
- Vehicle: 1990 Jackaroo Rigout 2.6 4ZE1
Re: 99 Jackaroo petrol pinion nut
by geeves » Sun Nov 23, 2014 6:19 pm
36mm
unless you fit a new crush washer count the threads instead of measuring the torque.
New crush washer is designed to be set to the torque with the pinion aligned correctly but as it crushes it should only be used once. If you retorque it it overtightens the pinion. By setting the nut in the same place on the thread overcomes this even though it will seem loose. Remember to restake it
unless you fit a new crush washer count the threads instead of measuring the torque.
New crush washer is designed to be set to the torque with the pinion aligned correctly but as it crushes it should only be used once. If you retorque it it overtightens the pinion. By setting the nut in the same place on the thread overcomes this even though it will seem loose. Remember to restake it
Sanding your knuckles before starting work can help. That way you cant skin them
-
geeves - Site Admin
- Posts: 8964
- Joined: Sun May 10, 2009 1:36 pm
- Location: Rangiora
- Age: 63
- Country: NZ
- City: Rangiora
- Vehicle: 94 bighorn 4jg2
2013 Subaru XV
2 posts
• Page 1 of 1
Return to Drive train, Steering and Suspension
Who is online
Users browsing this forum: No registered users and 8 guests