Hello all, I've pulled my front diff out of my 96 isuzu Mu and with the intention of fitting a Lokka I've brought for it. I unbolted the diff mount brackets from the chassis and then unbolted the brackets once it was up on my workbench. I'm not sure how it happened but one bearing housing is now broken on the inside of the bracket. The bearing is just inside the diff on the stub axle.
Can anyone help me with where to get another housing from or do I start looking for another diff etc...
The diff using vacuum to engage the 4wd. I understand it came out with auto hubs but manual hubs have been installed before I brought it.
Have a look at the photos and if it doesn't make sense I'll try and explain it again better.