Well, finally got the intercool on and well, pitures speak
Here was the other nut (not me ;P ) behind the P/S pump to get them belts off
And belts off
so then finally got the compressor out the way, got my last bolt out, and with a slightly forceful power bar handle...
Drilled and taped the new locator screw
moved wastegate bracket down and left a bit and drilled a 5.5mm hole and put screw in (only one screw holding bracket on should be ok?)
And housing back on and rotated! woohoo. but im pretty sure i threaded the bottom left screw... not woohoo. but the housing is on pretty good, so i just left it hehe
And intercooler bolted on! good to see it on the truck and not in my room or workvan haha
And finally, a finished product, quick question for someone who knows the answer, vacuum line that used to go to old turbo pipe, there's a place for it on the intercooler but wouldn't reach so just blocked bot, but what is that vacuum line for?
Lastly, for those interested, i took a video of the truck running for a couple of sec's to show how the turbo is whining. keen to hear what people think
http://www.youtube.com/watch?v=Hg6OXh1e ... e=youtu.be