Well my road truck has a 4jb1 and when I bought it with a broken cambelt it had not bent any valves.. which was great being able to leave the head on. I now have a bush truck with the 4jg2 manual, only 136000kms but seemed like the original cambelt on it (Tensioner dropped its bearing, cambelt jumped a couple teeth and bang), not so lucky.. Bent intake valve in cylinder 1 and 4 it seems.
I have a cracked head off another engine with good valves which are going to get put into this head and now I am looking for a head gasket for the 4jg2. The one i'm looking at is on trademe for $83 but says it is 1.45mm thickness and for the 4jg2t, whereas the 3 options on 'partzonline' say 1.60, 1.65 and 1.70mm.. I'm confused as to what is the correct thicknesses, I do understand that there is 3 thicknesses for this motor but have no idea what they are....
Any help will be greatly appreciated