Just finished building a winch mount and front bar setup.
A lot more work than I originally thought. Used 6mm plate, folded it where possible for extra strength. Uses the body mount and the two captive nuts on the front of the chassis cross member so has 2xM12 and 2xM10 bolts on each side. Lots of bracing in it.
I recessed the bonnet latch support strut so that I could get everything sitting as far back as possible. Cut the inner guards to match the profile of the tube sides.
Got a Runva 12000lb winch with dyneema rope. Remote mounted the solenoid in the engine bay and fitted dual batteries.