I've just got rid of mine in my 1990 bighorn..
with a bit of trial and error I found out which solenoid to keep for my aircon fast idle.. it was the lowest one thats attached to the body.. kinda on its own.. (see pic)...
I was wondering what to do with all the left over electrics? shall I snip them off and tape them up?
CAM00036.jpg
I took butterfly out of the intake to intercooler at same time and blocked the holes with bolts.. looks a bit neater
CAM00039.jpg
another thing that might help anyone doing it is to bolt on the intake blanks I used some bolts out of the bottom of the assembly, just had to cut them down, (half roughly)
CAM00013.jpg
I've got some room now for my oil catch can.. so much better without all those lines in there..
You do not have the required permissions to view the files attached to this post.
vroom..._____________...........
vroom./---------|--------\.......
..&.....||______|_____O-\______....
....&...|--____---------------____--\..
........=\/-----\__________/-----\_|...
............\___/..................\___/...